Contact Us

DONGGUAN CHENGCHUANG INDUSTRIAL LIMITED

ADD:2205#, 31th Building, XiangZhangLuZhou, ZhangMuTou Town,Dongguan City,Guangdong Province, China 523622

Tel:0769-82017148

Fax:0769-82017780

E-mail:ken.tang@chengcg.com

Search
Position:Home > News > Industry News

What should gear reducer pay attention to during running-in period?

2019/5/6 10:23:41 Viewers:
Reducer in the actual use of the process are all in need of a run-in period, the correct run-in period, can effectively extend the life of the entire reducer gear, and before use, all operators are basically in accordance with the relevant methods given by the regular manufacturers to guide the operation, reducer in the actual use of the process should pay attention to what?
Reducer in the actual use of the process are all in need of a run-in period, the correct run-in period, can effectively extend the life of the entire reducer gear, and before use, all operators are basically in accordance with the relevant methods given by the regular manufacturers to guide the operation, reducer in the actual use of the process should pay attention to what?
1. During the operation of the reducer, we must pay attention to limiting all running-in periods. The workload of gear deceleration and even the whole workload should not exceed the rated workload of the reducer itself, and we should arrange a suitable time, because only in this way can we avoid the overheating of the whole phenomenon.
2. In the process of actual operation of gear reducer, we must observe the final operation situation. If there is any abnormality, we should stop the abnormal situation. Of course, we should exclude all the faults and stop the operation. We should reflect this situation to the merchants or manufacturers and help them solve it well.
3. In the actual working process of gear reducer, it is necessary to select the most suitable lubricating oil, especially the reducer with relatively large input power. Relatively speaking, during this period, they may often check the quality of all lubricants, or other conditions, to check the sealing of the whole machine, and in the process of inspection, you may find that these lubricants are missing, so in this case, it is necessary to analyze their reasons, whether it is because of the lack of use too fast. Or for other reasons, to help us find the problem.