Conatact Us

Home>> Message
The same program section for cnc machining |publisher:chengchuang | date:2014/12/2 7:58:00  (Large Middle Small )

 The same program section, the same instruction (the samesymbol addresses) or with a set of instructions, after the emergence of the play.

For example, tool change program, T2M06T3; change is T3 instead of T2;

G01G00X50.0Y30.0F200; is the implementation of the G00(although the F value, but does not implement G01).

Not the same set of instruction code, in the same program section swap sequence execution effect of the same.



Above all in the PMC-10V20 (FANUC SYSTEM) processing center to run through. In practical application, only a deep understanding of usage and programming rules of all kinds of orders.

M00: program suspend. When you press the "start" button,the panel to continue running the program.

M02: the end of the program.

M03: principal axis rotate.

M04: spindle reversal.

M05: spindle stop.

M08: open cutting fluid.

M09: close cutting fluid.

M10: automatic thread chamfer.

M11: off M10.

M30: the end of the program, and return to start.

M98 P: call subroutine. The format for the M98 P*******, the top three is the number of calls (if not, said 1 times), after four to tune the program number.

M99: end of subroutine sign.

?style type="text/css">
line: CNC Machining | diamond saw blades | agie charmilles edm | meter seal | plastic seal | vibrating screen | Refractory Bricks | china wire mesh | wire mesh type | EDA bearings | china mechanical seals | slip ring | 6061 aluminum plate | concrete machinery manufacturer | | | | Global Trade Info |
百度友情链接? 新濠天地( 时时彩开?/a>( 贝博娱乐?/a>( 网上娱乐?/a>( 博狗扑克( 博狗( 澳门娱乐?/a>( 赔率( 吉祥?/a>( 皇冠赌场( 赌博技?/a>(